Pages

July 27, 2014

Fold-up Fabric Needle Holder


Is this thing darling, or what??

I don't know about you, but I'm always digging around in my sewing box for a needle.  Ripped seam, popped button, (heaven forbid I actually have to hand sew something, but it happens.  I do so love my sewing machine...).

My needles are usually on my magnetic pin cushion, but they are hard to find (insert joke about needle in a haystack) and I'd rather have the needles in their own, designated place.  

I first saw one of these types of needle holders at my friend's house.  She's had it for a while, and loves hers!  I made myself a pattern, and it was a fun project.  


To begin, click this link to find the pattern shape.

Using the larger shape, you'll need to trace and cut out 2 pieces of fabric.  One of them should have fusible batting, interfacing or fusible fleece ironed to the back.

Using the smaller shape, trace and cut a piece out of felt.



Sew the two large pieces, right sides together, with 1/4 inch seam allowance.  Leave a 2 inch hole along the side of the tab or opposite end for turning.  Clip all the corners and curves before turning.


Turn right side out, and make sure to carefully push out all the turns.  Iron nice and flat.  Top stitch with 1/8" to 1/4" seam allowance.  Make sure to fold under the opening you used for turning, and catch it in the top stitch, so there is no longer a hole.


Next, you need to sew the smaller, felt flower shape down.
To easily know where I was sewing the felt down, I used a disappearing ink fabric pen (or a really light pencil mark would work) and a ruler to make lines between opposite inward points (see below).


Center the felt, sew along those lines from inward point strait across to opposite inward point.  Back stitch at the ends to secure.

Next, in order to make it fold properly I ironed the folds.  This really helped me when trying to make that nice folded shape at the end.  If you start by placing the tab up, fold the flower shape diagonally to one side and iron, and then fold it diagonally the other way and iron.  It will be folded along the sewn lines when done this way.


Then, fold it backward along the middle, as you see below, and press with your fingers.  Depending on the kind of felt you use, you may not want to iron it.  Some felt I have purchased off the roll will melt if ironed!





Once everything was tucking in where it was supposed to, I ironed it again very well to reinforce the way it should fold.

For the closure, I used a sewed a small piece of Velcro to the end of the tab (again, used what I had on hand!), and the matching piece of Velcro on the other side of the holder.  Then, I sewed a decorative button on the back of the tab.  You could even use a functioning button with a button hole if you don't have Velcro handy...


Awesome!  Now, I have this great fabric needle holder - with the needles securely in the felt, no lost needles because it folds it up into a cute little bundle for safekeeping.  
This is such a quick project, you'll want to make a few for your friends.  And they will love them too!


image signature
Follow me on Facebook




July 4, 2014

Patriotic Shabby Fabric Headbands - a very quick DIY craft



Want to add a little patriotic flair to your wardrobe?!  These shabby headbands are so fast, I whipped 2 of them up for my girls in about 10 minutes!

You really only need a few, long, skinny scraps of fabric, about 1 yard long in red, white and blue.

Make a snip about 1 - 2 inches wide on the fabric you want on the base, and TEAR your fabric.  It is amazing how cool this ends up looking, and how it comes out in a straight line!  If your first tear is not straight compared to your edge, make another snip and tear again.  The grain will stay the same, but may not be in line with the manufactured/cut original edge. 



Tear a second piece, in a different color, slightly thinner than the first.
Lay them on top of eachother, so the wider one is on bottom.  If you want to taper your ends slightly, do that now with scissors.
Sew along the edge of the skinnier/top piece of fabric, leaving about 1/8" seam allowance.  Sew two or three times up each side, letting your line wave and cross to accentuate the shabby look.  I used a dark, contrasting color to add a decorative element. 

Now to add flowers.
Tear a piece of fabric about 1" wide and 1 foot long. 
Tuck the end under and start to twirl the fabric in a circle. 

You can twist the strip as you go if you want, but just make a tight little pinwheel.
Then, tuck the end under, and place it on your headband.  I dont usually put it in the middle, because I like my flowers off to the side of my head.  So maybe 1/3 of the way along your headband, place the flowers. 
I dont pin them down, I just smoosh them with the presser foot of my sewing machine.  Then, I sew in a spiraling circle all along the flower.
I twist and twist my headband, sewing the circle tighter and tighter, catching the layers of the twirly flower as I go.  Do this with 2 - 4 flowers, overlapping each flower a bit if you want, sewing each individually.  It ends up looking like this:


That is it!  So simple.
Happy 4th of July!!



image signature